Easy Steps To Clean Your Plastic Water Storage Tank

Cleaning your plastic water storage tank can be a quite formidable task, yet it is important to ensure the water inside the tank remains clean and bacteria-free all time. Therefore, your water storage tank should be cleaned at least once a year. The growth of algae, various bacteria, and germs is harmful to the drinking water if the water tank is not taken care of properly. However, while cleaning your water tank, you should follow proper processes for draining it, cleaning the interior walls, and most importantly, disinfecting the tank at the end. Go through this article brought to you by a renowned plastic water storage tank manufacturer in Kolkata to know the proper ways to clean a water tank. By applying the following ways, you can make sure that your water is as clean and safe as it is possible.

• Drain the water tank- The very first step to cleaning your water tank is to empty all of the water from it. In order to do that, you need to open the outlet valve or tap at the bottom of your tank and allow all of the water to flow out of it. Use a plastic cup or mug to scoop the entire water to the lees. And, in order to remove the remaining water, you can use a wet or dry vacuum to suck up any water and a towel to soak up the leftover water entirely.
• Clean the inside of the water tank- Now, you need to mix hot water with random detergent powder or liquid for making a cleaning solution. After that, you can use a bristle brush or abrasive sponge to scrub the interior of the water tank, with the cleaning solution. You have to continue scrubbing around the entire walls of the tank until you can remove as much slime as possible. Move your arm horizontally from one side to another and put a good amount of pressure on the brush or sponge. You can even try sprinkling the tank walls with baking soda and scrubbing with your brush or sponge properly. Do not forget to scrub the corners and the joints of the water tank. It might appear a bit difficult.
• Rinse out thoroughly- If you are satisfied with your scrubbing, now is the time to rinse the interior thoroughly. To get the best result, you can use a hose spray and get into every nook and corner of the tank. In an alternative way, you can rinse the water tank by filling it with hot water and letting it stand for several hours, and finally draining the water completely. You need to repeat this process until the water is completely free of detergent or any cleaning solution.
• Disinfect the water tank- Now, the time of disinfecting the tank has come, and to start this process, you need to use a hose to fill your water tank three-quarters of the way full with clean water. Add chlorine bleach in a proper ratio to the water. Once you are done adding the appropriate amount of bleach to the tank water, fill the tank to volume with clean water since it will let the bleach mix with the rest of the water inside the tank. Now, leave the mixture of chlorine and water at least for one entire day (24 hours).
• Again, drain the tank completely- Now, again you need to drain the tank entirely. Note that, you should never drain the tank directly into your main water distribution system.
We guess this article has been helpful to you with some important information about cleaning a plastic water storage tank.